THREADLOCKER NUT LOCK

9- 242, medium strength general purpose grade

( see table below )

FOR SMALL SREWS ETC : STRENGTH 12 N/mm2 : COLOR BLUE

ANAEROBICSAnaerobic threadlocker grade 242, single component adhesives that sets in the absence of air on metals. Available in many different grades , strengths , temperature ranges , viscosities, with different gap filling properties.

All starloc industrial adhesives threadlocker, retainer, cyanoacrylate and epoxy resins are all formulated to strict standards in England by Five Star Adhesives ( StarLoc ).

Unlike low quality `old-fashioned` formulations these products will even cure rapidly on `in-active` metals such as zinc , chrome plate etc..

STAR-LOC Industrial Anaerobic are the best that you can buy., Just as good as any of the well known brands commonly available.

Far superior in performance to `old fashioned` methods of restraining bolts, nuts and studs ( threaded components ) against shocks, loads and vibration. Reduced costs and higher performance every time!

STARLOC
GRADE		 EQUV.
LOCTITE
GRADE		 COLOR   VISCOSITY
CPS		 GAP FILL 
mm		 MAX TEMP  CURED
STRENGTH
N/mm2		 CURE TIME
MINUTES		 NAME MAIN USES
9-222 222 PURPLE  1000 .5 160C 2-3.5 15 SCREW LOC LOW STRENGTH:EASY DISSASEMBLY:SMALLFASTENERS
 9-242  242 BLUE  1000 .1 160C 12 3-7 NUT LOC   MED. STRENGTH GENERAL PURPOSE
 9-243  243 BLACK  1200 .1  160C 12 10  BOLT LOC  OIL TOLERANT, FOR AS RECEIVED PARTS
 9-260  260 RED   1300 .25  160C 17 10  STUD LOC  HIGH STRENGTH, CAN BE DISASSEMBLED UP TO 6mm
 9-262  262 ORANGE  2500 .25  160C 19 15  STUD LOC+  EXTRA STRENGTH STUD LOCK 6mm TO 12 mm
 9-270  270 RED   500 .25  160C 21 10  STUD LOC++  FOR FASTENINGS UP TO 25mm FOR NO DISASSEMBLY
 9-272  272 RED   600 .25  160C 22 10  STUD LOC+++  EXTRA STRENGTH FOR 25mm+ STUDS
 9-277  277 RED   7000 .25  160C 25 10  STUD LOC MAX  PERMANENT GRADE STUD LOC FOR V.BIG STUDS
 9-290  290 GREEN   15 .05 160 C 16 5-10  PENETRATING
STUD LOC		  HIGH STRENGTH, WICKING GRADE FOR POST APPLICATION
 9-292  292 YELLOW   15 .05  160C 19 5-10  PENETRATING
THREAD LOC		  LOW STRENGTH, WICKING GRADE THREAD LOCK FOR POST APPLICATION
9-022   PINK 10-20 .1 160C 2-4 1-3 SCREW LOCK LOW STRENGTH THREADLOC
FOR USE ON PLASTIC PARTS		      
9-024   PINK 10-20 .1 160C 10 1-3 NUT LOCK MEDIUM STRENGTH THREADLOC FOR USE ON PLASTIC PARTS      
9-077   BLACK 10-20 .1 160C 15 1-3 STUD LOCK HIGH STRENGTH THREADLOC
FOR USE ON PLASTIC PARTS		      

RETAINERS

( BEARING / SHAFT GRADES )

Takes the stress out of fitting bearings!

Unlike `old-fashioned methods of fitting`, retaining bearings using retaining compound allows `slip-fitted` parts instead of the methods of heating the housing and pressing in the bearing that can result in warped or cracked housings or damaged bearings.

worn components can be re used and components such as split pins and keys can be eliminated completely, saving money and giving a longer lasting and structualy better job that gives 100% total surface contact!

STAR-LOC
GRADE		 EQU.LOCTITE
GRADE		 COLOR  VISCOSITY
cPS		 GAP FILL
mm		 CURED
STRENGTH
N/mm2		 CURE
TIME
MINUTES		 NAME USE
9-601 601 GREEN   150  ..15  20  10-15   GP. RETAINER CLOSE FIT PARTS, ROLER BEARINGS, CAMS ETC
9-603 603 BLACK   125  .05  20  10-15   GP. RETAINER AS 601, NO PRE CLEANING REQUIRED
9-609 609 ORANGE   125  .05  20  30-60   SLOW CURE GP SLOW CURE VERSION OF 603
9-620 620 YELLOW   1500  .15  25  10-15   HIGH STRENGTH FAST CURE UP TO 450 DEG F HIGH TEMP
9-635 635 GREEN   2500  .15  30  10   LOW STRENGTH FAST CURE FOR BUSHES,KEYS,SPLINES,TUBING WITH CLOSE FIT
9-638 638 ORANGE   2500  .15  30  40   LOW STRENGTH SLOW CURE AS 635, BUT SLOW CURE
9-641 641 YELLOW   1500  .2  11.5  15   MED. STRENGTH RETAINER BEARINGS, SHAFTS,REDUCES FRETTING
9-6-48 648 YELLOW   1500  .2  25  25   HIGH STRENGTH,SLOW CURE UPTO 180 DEG C, ELECTRIC MOTORS,PULLEYS,BEARINGS ETC
9-660 660 RED  3000   .3  25 60+   EXTRA GAP FILL WORN SHAFTS,PULLEYS ETC

sealants

             
             
             
             
             
             

fgfdgfg