Industrial Adhesives

THREADLOCK , LOCK AND SEAL PRODUCTS
THREADLOCK Single part threadlock products for locking all threaded parts against vibration loosening and fatigue / wear plus the added adventages of stopping leakage of fluids and gasses past the threads as well as preventing any build up of corrosion between the two threaded parts.

Threadlockers are 100% reliable unlike other methods of locking ( lock washers, split pins, nylon insert nuts etc... ) and because you can cut down on parts you can lower the costs of an item.
 

More reliable than traditional methods,

Easier to use,

Lower cost due to reduced parts,
 

Starloc threadlockers cure after contact with metals and the absence of air, many other brands of threadlockers wont cure on plated metals or stainless steel etc, Starlocs unique formulations will cure fully even on stainless steel or chrome plate.
  If working in cold conditions, with dirty parts or when a high speed cure is required a range of spray on cleaner/primers and accelerators are available to speed cure ( see below )
   

STARLOC
GRADE		 EQUV.
LOCTITE
GRADE		 COLOR   VISCOSITY
CPS		 GAP FILL 
mm		 MAX TEMP  SHEAR
STRENGTH
N/mm2		 BREAKAWAY TORQUE
Nm		 PREVAILING
TORQUE
Nm		 CURE TIME
MINUTES		 NAME MAIN USES price 10g price
50g		 price
250g
9-222 222 PURPLE  1000 .5 160C 2-3.5 4-8 2-4 15 SCREW LOC LOW STRENGTH:EASY DISSASEMBLY:SMALLFASTENERS £3.99 £13.99 £45.99
 9-242  242 BLUE  1000 .1 160C 12 17-22 5-8 3-7 NUT LOC   MED. STRENGTH GENERAL PURPOSE "" "" ""
 9-243  243 BLUE  1200 .1  160C 12 17-22 5-8 10  BOLT LOC  OIL TOLERANT, FOR AS RECEIVED PARTS "" "" ""
 9-260  260 RED   1300 .25  160C 17 28-32 50-58 10  STUD LOC  HIGH STRENGTH, CAN BE DISASSEMBLED UP TO 6mm "" "" ""
 9-262  262 RED  2500 .25  160C 19 30-35 55-65 15  STUD LOC+  EXTRA STRENGTH STUD LOCK 6mm TO 12 mm "" "" ""
 9-270  270 RED   500 .25  160C 21 32-40 60-70 10  STUD LOC++  FOR FASTENINGS UP TO 25mm FOR NO DISASSEMBLY "" "" ""
 9-272  272 RED   600 .25  160C 22 35-55 55-75 10  STUD LOC+++  EXTRA STRENGTH FOR 25mm+ STUDS "" "" ""
 9-277  277 RED   7000 .25  160C 25 35-55 55-75 10  STUD LOC MAX  PERMANENT GRADE STUD LOC FOR V.BIG STUDS "" "" ""
 9-290  290 GREEN   15 .05 160 C 16  17-22 5-8 5-10  PENETRATING
STUD LOC		  MEDIUM STRENGTH, WICKING GRADE FOR POST APPLICATION "" "" ""
 9-292  292 YELLOW   15 .05  160C 19 28-32 50-58 5-10  PENETRATING
THREAD LOC		  HIGH STRENGTH, WICKING GRADE THREAD LOCK FOR POST APPLICATION "" "" ""
9-022   PINK 10-20 .1 160C 2-4     1-3 SCREW LOCK LOW STRENGTH THREADLOC
FOR USE ON PLASTIC / GLASS / METAL / WOOD PARTS		 "" "" ""
9-024   CLEAR 10-20 .1 160C 15     1-3 NUT LOCK MEDIUM STRENGTH THREADLOC FOR USE ON PLASTIC / WOOD / GLASS / METAL PARTS "" "" ""
9-077   BLACK 10-20 .1 160C 25     1-3 STUD LOCK HIGH STRENGTH THREADLOC
FOR USE ON PLASTIC / METAL / GLASS / WOOD PARTS		 "" "" ""

ACCELERATOR / PRIMER ( spray on )

TO SPEED CURE OF THREADLOCKERS AND RETAINERS

SIMPLY APPLY THIS PRODUCT TO ONE SURFACE BEFORE ASSEMBLEY TO SPEED CURE ON CLEAN PARTS, USE DEGREASER / PRIMER TO CLEAN AND PRIME DIRTY PARTS

CODE TYPE DESCRIPTION PRICE
ANP N /50  Primer / activator for threadlock / retainer / gasket sealer
solvent based		 50ml
£3.99
ANP N/150 "" AS ABOVE, LARGER SIZE
100ml
£7.50
 ANP `T`/50 Primer / activator for threadlock / retainer / gasket sealer
solvent free		 50ml
£3.99
 ANP T/150 "" AS ABOVE, LARGER SIZE 100ml
£7.50
DEG / 50  DEGREASER / PRIMER FOR CLEANING PARTS PRIOR TO ASSMBLEY  50ml £3.99
DEG / 150 DEGREASER / PRIMER FOR CLEANING PARTS PRIOR TO ASSEMBLEY 100ml £7.50

STARLOC / FIVE STAR ADHESIVES,

POBOX 96, LIVERPOOL, L17 3WZ. ENGLAND

TEL/FAX 0151 733 7182