ANAEROBIC ADHESIVES / SEALANTS

THREADLOCKER AND RETAINER ADHESIVES AND SEALANTS

THREADLOCKER, RETAINER, GASKET SEALER, BEARING FIT ETC

ANAEROBIC ADHESIVES / SEALANTSSingle component adhesives based on complex blends of dimethacrylate, methacrylate and polyurethane methacrylate resins with complex accelerator and curing package.

Formulated to set in the absence of air on metals ( grades for use on plastics also available ). Unlike low quality `old-fashioned` formulations these products will even cure rapidly on `in-active` metals such as zinc , chrome plate etc..

STAR-LOC Industrial Anaerobic are the best that you can buy., Just as good as any of the well known brands commonly available.

Also available are a range of primers and acelerators to clean and prime inactive or dirty surfaces to ensure a rapid strong cure under even the coldest of conditions.

THREADLOCKS

Far superior in performance to `old fashioned` methods of restraining bolts, nuts and studs ( threaded components ) against shocks, loads and vibration. Reduced costs and higher performance every time!

Trade bulk discounts, custom labeling and packaging fax for prices.

SIZES AVAILABLE, 7g, 10g, 20g, 50g, 150g, 250g, 1kg, 10kg, 25kg

STARLOC
GRADE		 EQUV.
LOCTITE
GRADE		 COLOR   VISCOSITY
CPS		 GAP FILL 
mm		 MAX TEMP  SHEAR
STRENGTH
N/mm2		 LOCKING
TORQUE
N/m BREAKAWAY		 LOCKING TORQUE
N/m
PREVAILING		 CURE TIME
MINUTES		 NAME MAIN USES
9-222 222 PURPLE  1000 .5 160C 2-3.5 4-8 2-4 15 SCREW LOC LOW STRENGTH:EASY DISSASEMBLY:SMALLFASTENERS
 9-242  242 BLUE  1000 .2 160C 8-12 17-22 5-8 3-7 NUT LOC   MED. STRENGTH GENERAL PURPOSE
 9-243  243 BLACK  1200 .2  160C 8-12 17-22 5-8 10  BOLT LOC  OIL TOLERANT, FOR AS RECEIVED PARTS
 9-260  260 RED   1300 .25  160C 15-17 28-32  50-58  10  STUD LOC  HIGH STRENGTH, CAN BE DISASSEMBLED UP TO 6mm
 9-262  262 ORANGE  2500 .25  160C 17-20 30-35  55-65 15  STUD LOC+  EXTRA STRENGTH STUD LOCK 6mm TO 12 mm
 9-270  270 RED   500 .25  160C 18-25 32-40  60-70 10  STUD LOC++  FOR FASTENINGS UP TO 25mm FOR NO DISASSEMBLY
 9-272  272 RED   600 .25  160C 20-25 35-55  55-75 10  STUD LOC+++  EXTRA STRENGTH FOR 25mm+ STUDS
 9-277  277 RED   7000 .25  160C 20-25  35-55 55-75 10  STUD LOC MAX  PERMANENT GRADE STUD LOC FOR V.BIG STUDS
 9-290  290 GREEN   15 .05 160 C 8-12 17-22 5-8 5-10  PENETRATING
STUD LOC		  HIGH STRENGTH, WICKING GRADE FOR POST APPLICATION
 9-292  292 YELLOW   15 .05  160C 15-17 28-32  50-58 5-10  PENETRATING
THREAD LOC		  LOW STRENGTH, WICKING GRADE THREAD LOCK FOR POST APPLICATION
9-022   PINK 10-20 .1 160C 2-4     1-3 SCREW LOCK LOW STRENGTH THREADLOC
FOR USE ON PLASTIC PARTS		      
9-024   PINK 10-20 .1 160C 10     1-3 NUT LOCK MEDIUM STRENGTH THREADLOC FOR USE ON PLASTIC PARTS      
9-077   BLACK 10-20 .1 160C 15     1-3 STUD LOCK HIGH STRENGTH THREADLOC
FOR USE ON PLASTIC PARTS		      

RETAINERS

( BEARING / SHAFT GRADES )

Takes the stress out of fitting bearings!

Unlike `old-fashioned methods of fitting`, retaining bearings using retaining compound allows `slip-fitted` parts instead of the methods of heating the housing and pressing in the bearing that can result in warped or cracked housings or damaged bearings.

worn components can be re used and components such as split pins and keys can be eliminated completely, saving money and giving a longer lasting and structualy better job that gives 100% total surface contact!

STAR-LOC
GRADE		 EQU.LOCTITE
GRADE		 COLOR  VISCOSITY
cPS		 GAP FILL
mm		 SHEAR
STRENGTH
N/mm2		 LOCKING TORQUE
Nm
BREAKAWAY		 LOCKING TORQUE
Nm
PREVAILING		 CURE
TIME
MINUTES		 NAME USE
9-601 601 GREEN   150  ..15  20 30-35 55-70  10-15   GP. RETAINER CLOSE FIT PARTS, ROLER BEARINGS, CAMS ETC
9-603 603 BLACK   125  .05  20 30-35 55-70  10-15   GP. RETAINER AS 601, NO PRE CLEANING REQUIRED
9-609 609 ORANGE   125  .05  20 30-35 55-70  30-60   SLOW CURE GP SLOW CURE VERSION OF 603
9-620 620 YELLOW   1500  .15  25  30-40 55-70   10-15   HIGH STRENGTH FAST CURE UP TO 450 DEG F HIGH TEMP
9-635 635 GREEN   2500  .15 25-30 30-40 55-75  10   MAX STRENGTH FAST CURE FOR BUSHES,KEYS,SPLINES,TUBING WITH CLOSE FIT
9-638 638 ORANGE   2500  .15  25-30  30-40 55-75  40   MAX STRENGTH SLOW CURE AS 635, BUT SLOW CURE
9-641 641 YELLOW   1500  .2  8-12  12-15 16-22  15   CONTROLLED. STRENGTH RETAINER BEARINGS, SHAFTS,REDUCES FRETTING
9-6-48 648 YELLOW   1500  .2  20-30 30-35  55-70  25   HIGH STRENGTH,SLOW CURE UPTO 180 DEG C, ELECTRIC MOTORS,PULLEYS,BEARINGS ETC
9-660 660 RED  3000   .3  25  30-40 55-70 60+   EXTRA GAP FILL WORN SHAFTS,PULLEYS ETC

sealants

             
             
             
             
             
             

fgfdgfg